The
specially manufactured UV protected poly-pipe is cut to length ready for
heating in the kiln. The pipe comes in white and vanilla only and is
35mm in diameter. |
|
The
kiln and rubber inserts are heated to the correct temperature and the pre-cut
pipe is placed over the rubber insert and heated for about 1 and a half
minutes. |
|
The
pipe with rubber insert is then placed in the appropriate mould until
relatively cool when the rubber is removed and replaced in the kiln. |
|
When
cooled, the pipe is removed from the mould for assembly as a chair or
sun-lounge. High quality clear pvc cement is used in all joints. The
fabric sling is the final item of assembly. |
|